Garden furniture and two deck chairs 1:18


Contains small parts – not suitable for children under 3 years.


Garden furniture and deck chairs 1:18

The height  is 6.8 cm  width  3 cm, table top 3.3 x 4.8 cm.

To assemble, you will need universal glue. Do not bend the flexible back / seat of the chair more than it naturally bends. Untreated plywood is easy to work on, for example by painting. You can wax, varnish or paint the furniture or even use markers. To get an old-fashioned-looking finish little sanding in the edges and the area worn from sitting with fine sandpaper after painting helps. The furniture set is beautiful also without treating. 

Assembly and handling

Start assembling the furniture by jiggling the parts off the plate. To assemble, you will need universal glue. The easiest way to assemble this: add the glues at the points instructed on the label. Place the other side on the table and Insert the seats  pins into the notches made for them, bending the backrest. Next, insert the second sidepiece. At this point, you have to force the bending seat piece a bit so that it snaps into place. Remove any spilled glue and check that everything is well before the glue dries. You can experiment paints with the leftover pieces.


Our machines run on eco-electricity. The workshop is located in Kt. Oy in the Kangasalan Yhteiskylä area, where we follow several nature-saving principles.


You can visit our workshop (Muurahaispolku 1, 36200 Kangasala) to pick up products at a pre-agreed time (Anu: 050 376 5848 We do not have our own store in Kangasala. Information about retailers on our website. Product availability should be checked in advance, not ever retailer has full collection. In addition, I attend several dollhouse sales and various handicraft fairs around Finland during the year.