8‑Piece Furniture Set for a Dollhouse’s Dollhouse

6.00€

⭐ Assembly Instructions – Furniture Kit

From this small and charming package, you can build 8 pieces of furniture for the dollhouse’s dollhouse.

Start gently: Wiggle the parts loose slowly and carefully. It’s always a good idea to test‑assemble before gluing – it makes the process easier and helps prevent mistakes.

For gluing, I recommend an all‑purpose white craft glue (similar to Erikeeper). (I do not recommend super glue or hot glue for these tiny joints.)

⭐ Finishing

The furniture pieces are adorable just as they are. If you wish, you can sand or scrape off the connector marks.

Domestic birch plywood is suitable for many kinds of finishes:

painting
waxing
varnishing
staining
or you can simply leave the beautiful wood surface visible

After removing the parts, you’ll have a little extra plywood left over for experimenting – a small test palette for colours and surface treatments.

⭐ Safety

All parts in the package are small or very small, so the product is not suitable for children under 3 years of age.

Please also remember to stay attentive during assembly, so that the small – and very small – pieces don’t wander off on their own adventures.

Category: Mini Mini stuf 1:48 Tags: birch plywood, Dollhouses Dollhouse, miniature, miniature collectors

Description

Description

8 pieces of furniture for the dollhouse’s dollhouse

Activities – Crafting – Small moments of big joy! Parts for a buildable set of 8 pieces of furniture for a dollhouse’s dollhouse.

This miniature furniture set contains 8 pieces. Furniture for a dollhouse’s dollhouse, small room boxes, or for miniature collectors.

You can paint, varnish, wax, stain – or leave the beautiful wood surface visible.

Material: Gepetto’s buildable kits are made in our own workshop in Kangasala from domestic birch plywood.

Label and instructions for the package: 8 buildable furniture pieces for a dollhouse’s dollhouse.

Measurements when assembled

Sofa: width approx. 2 cm, backrest height approx. 1.3 cm Armchair: width approx. 0.85 cm, backrest height approx. 1.1 cm Table: approx. 0.8 × 1.3 cm, height approx. 0.8 cm Bed: width approx. 0.9 cm, headboard/footboard height approx. 1.1 cm Stool: height 4 mm (two round pieces glued on top of each other)

Extra: Floor piece – just in case you feel inspired to build a tiny room inside a matchbox (standard size).

⭐ Availability

The easiest way to get our buildable kits is to order them from our online shop.

I also attend events and fairs around Finland. You can find up‑to‑date event information here: Tavataan täällä → https://www.gepetto.fi/tavataan_taalla/

Selection varies between sales locations. If you want to make sure a specific product is available at an event, you can place a pre‑order:

Text message / WhatsApp: 050 376 5848 Email: gepetto@gepetto.fi

I will reserve the product for you (and it’s perfectly fine if you can’t make it to pick it up).

⭐ Pickup from the Workshop

The mini‑package can also be picked up from our workshop: Muurahaispolku 1, 36200 Kangasala Please agree on a time in advance: 050 376 5848 (text/WhatsApp) or gepetto@gepetto.fi

⭐ Retailers

Some of our retailers carry Gepetto’s dollhouse products. Tallimiehen puoti at Tallipiha in Tampere has an especially good selection.

You can find all retailers on our website. Please note that not all carry the full range – check availability beforehand.

⭐ Environment and Materials

Gepetto’s buildable kits are created in the Yhteiskylä area of Kangasala, where we follow several nature‑friendly principles. The workshop machines run on eco‑electricity.

Our plywood supplier is Koskisen Oy, whose wood products are long‑lasting, versatile, and carbon‑binding. They produce biofuels from logging residues and by‑products of wood processing, which are used as energy in factories and nearby district heating plants.